Multitech CDMA Betriebsanweisung PDF herunterladen (Seite 80)

3GPP TS 27.005 AT COMMANDS FOR SMS AND C

AT Commands for EV-DO-EV3 Modems

Message Configuration

Set Text Mode Parameters +CSMP

Set command selects values for additional parameters for storing and sending SMS when text mode is used

(AT+CMGF=1).

Read command reports the current setting in the format:

+CSMP: <callback_addr>,<tele_id>,<priority>,<enc_type>

Test command returns the OK result code.

Syntax

Command Command type

AT+CSMP=[<callback_addr> [,<tele_id >[,<priority>

[,<enc_type >]]]]

Set

AT+CSMP? Read

AT+CSMP=? Test

Parameters and Values

<callback_addr> Callback address.

Maximum length depends on the carrier.

For Sprint and Aeris, maximum length is 32 characters.

For Verizon, maximum length is 20 characters.

Note: Initially, this parameter is null. Some carriers discard SMS's without a

callback number. Use the AT+CSMP command to setup a callback number.

<tele_id> Teleservice ID.

4097 Page.

4098 SMS message (factory default).

<priority> Priority. Priority is different with every carrier.

0 Normal. Default: 0.

1 Sprint/Aeris – Interactive. Verizon – High.

2 Sprint/Aeris – Urgent.

3 Sprint/Aeris – Emergency.

<enc_type> Data coding scheme.

0 8-bit Octet. Aeris Default: 0.

2 7-bit ASCII. Verizon/Sprint Default: 0.

4 16-bit Unicode. Sprint does not support.

Notes

 Use +CSAS to store current settings.

 Reference: GSM 27.005, 3GPP TS 23.040, and 3GPP TS 23.038.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 248 249

Keine Kommentare

Multitech CDMA Betriebsanweisung Seite 80