Multitech CDMA Betriebsanweisung PDF herunterladen (Seite 71)

3GPP TS 27.007 AT COMMANDS

71 AT Commands for EV-DO-EV3 Modems

3 The module wakes up in "alarm mode" if at the alarm time it was off,

otherwise it remains fully operative. In both cases the module starts

playing the alarm tone on the selected path for the ringer. See #SRP.

The device keeps playing the alarm tone until a #WAKE or #SHDN

command is received or a 90 second timeout occurs. If the device is in

alarm mode and does not receive the #WAKE command within 90

seconds, it shuts down.

4 The module wakes up in "alarm mode" if at the alarm time it was off,

otherwise it remains fully operative. In both cases the module brings the

pin GPIO6 high, provided its <direction> is set to alarm output, and keeps

it in this state until a #WAKE or #SHDN command is received or a 90

seconds timer expires. If the device is in alarm mode and does not

receive the #WAKE command within 90 seconds, it shuts down.

5 The module makes both the actions as for type=2 and <type>=3.

6 The module makes both the actions as for type=2 and <type>=4.

7 The module makes both the actions as for type=3 and <type>=4.

8 The module wakes up in "alarm mode" if at the alarm time it was off,

otherwise it remains fully operative. In both cases the module sets High

the RI output pin. The RI output pin remains High until next #WAKE issue

or until a 90 second timer expires. If the device is in alarm mode and does

not receive the #WAKE command within 90 seconds, it shuts down.

<text> Unsolicited alarm code text string. It has meaning only if <type> is equal

to 2, 5 or 6.

<recurr> String type, value indicating day of week for the alarm in one of the

following formats:

“<1..7>[,<1..7>[, … ]]” Sets a recurrent alarm for one or more days in the week; the digits 1 to 7

corresponds to the days in the week. Monday is 1.

“0” Sets a recurrent alarm for all days in the week.

<silent> Integer type indicating if the alarm is silent or not.

0 The alarm is not silent.

1 The alarm is silent.

During the "alarm mode" the device does not make any network scan

and does not register to any network and therefore is not able to dial or

receive any call or SMS, the only commands that can be issued to the

module in this state are the #WAKE and #SHDN, every other command

must not be issued during this state.

Note: You must set the RTC (issuing +CCLK) at least once before you can

issue +CALA with <type>=8.

Notes

 Reference: ETSI 07.07, ETSI 27.007.

Example

AT+CALA="02/09/07,23:30:00+00"

AT+CALA="12/09/07,10:38:00+02",0,2,GO GET SOME COFFEE,"",0

AT+CALA?

+CALA: "12/09/07,10:38:00",0,2,"GOGETSOMECOFFEE","",0

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 248 249

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech CDMA Betriebsanweisung Seite 71

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech CDMA