Multitech MT5634HD16 Betriebsanweisung PDF herunterladen (Seite 98)

RASExpress User Guide

88 CommPlete Communications Server

pression. If you select Enabled, CIPX compression must also be enabled on the server

for your choice to have an effect. You can edit this field only if IPXCP is enabled for

the port.

NetBIOS over IPX

This field allows you to enable or disable routing of NetBIOS over IPX packets on the

port. Enable it if you are using applications that require NetBIOS over IPX support.

You can edit this field only if IPXCP is enabled for the port.

BCP

This field shows the status of the Bridge Control Protocol (BCP) for the port. Enable

BCP if the other end of the PPP link supports BCP.

IPCP

Select Enabled to enable IP for the port. Select Disabled if TCP/IP or PPP is not to be

used.

Local Address

This field shows the IP local network address of the port. This address can be edited

only for LAN-to-LAN ports, and only if IPCP is enabled for the port. For all client-to-

LAN connections, the local address is the same as the IP address of the LAN port. For

LAN-to-LAN ports, make sure the IP address is on a different network or a subnet of

any of the existing networks.

Remote Address

This field shows the IP network address of the port. It is the address assigned to the

remote PPP client. It must be on the same network as the IP local address. This field

can be edited only if IPCP is enabled for the port. It cannot be edited for client-to-

LAN ports if DHCP is enabled.

Subnet Mask

This field contains the mask used to specify the subnetwork part of the IP address.

For all client-to-LAN connections it is the same as the LAN network. See “IP

Addressing” on page 7.

VJ Compression

Select Enabled to enable Van Jacobson compression of TCP/IP headers on the PPP

link. VJ compression is used by many PPP clients. Select Disabled to disable Van

Jacobson compression. If IPCP and VJ Compression are enabled, a dial-in PPP client

that uses this compression method may experience greater speed than with VJ

Compression disabled.

Forward Broadcast

This field allows you to enable or disable forwarding of UDP broadcast packets onto

the WAN port. Enable it if your UDP applications depend on the broadcasts. When

forwarding is enabled, the RASExpress server forwards to the selected port all UPD

broadcast packets that come from the LAN and from the client-to-LAN ports. For-

warding broadcasts on remote links increases the traffic on the links, so enable for-

warding only if necessary.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 291 292

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT5634HD16 Betriebsanweisung Seite 98

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech MT5634HD16