Multitech MultiConnect Adapter Betriebsanweisung PDF herunterladen (Seite 95)

Chapter 8 – Point-to-Point Protocol

Command Line Interface and Application Examples for Multi-Tech Systems, Inc. IP Modules (S000368F) 95

Serial Interface Related Parameters

Connect Type

This command sets the connection type. A connection type can be either a direct connection or a connection

through a modem. In case of a modem connection, the modem settings also have to be configured as

described in the following sections.

Command: # set serial [serial-interface] connect-type <direct/modem>

Example: #set serial s0 connect-type direct

(Or)

#set serial s0 connect-type modem

#set serial s1 connect-type direct

"Modem port s1 is an inbuilt modem interface and cannot be set to direct"

ERROR

#set serial s1 connect-type modem

Modem Settings - For Modem Connection Only

This command sets the initialization string of the modem.

Command: # set serial [serial-interface] modem init-string <line-no> <init string>

Example: #set serial s1 modem init-string 1 ATS0=1

This command sets the hangup string of the modem.

Command: # set serial [serial-interface] modem hangup-string <hangup string>

Example: #set serial s1 modem hangup-string +++ATH0

This command sets the dial-prefix string of the modem.

Command: # set serial [serial-interface] modem dial-prefix <dial-prefix string>

Example: #set serial s1 modem dial-prefix ATDT

This command is used to set the dial number on the dialing end.

Command: # set serial [serial-interface] modem dial-number <phone no>

Example: #set serial s1 modem dial-number 224824

This command is used to set the dialing trigger mode

Command: # set serial [serial-interface] modem dialing-trig-mode <none/dtr/command>

Examples: # set serial s0 modem dialing-trig-mode <none/dtr/command>

ERROR : ‘Command not supported on device port s0’

# set serial s1 modem dialing-trig-mode <none/dtr/command>

Notes

• By default, the modem on modem port s1 is in the answering state.

• The user can choose the dialing trigger method with the following command to dial.

• This command is valid only for the modem port s1.

Definitions:

none: When the dialing-trig-mode is configured none, the modem dials immediately once the

target boots up.

dtr: When the dialing-trig-mode is configured dtr, the modem dials as soon as the TR goes

high on the device port s0; i.e., when the serial device is connected to s0.

command: When the dialing-trig-mode is configured as command, the serial device can

control the physical link establishment and link termination with the aid of the

commands linkup s1 and hangup s1 respectively.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 153 154

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MultiConnect Adapter Betriebsanweisung Seite 95

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech MultiConnect Adapter