Multitech CF220 Betriebsanweisung PDF herunterladen (Seite 57)

Chapter 6: Device Manager Installation & Operation

Multi-Tech Systems, Inc. CF220-DID CallFinder User Guide 57

Using the Auto-Discovery Monitor

The Auto-Discover Devices command of Device Manager will automatically search the network for

FaxFinder, CallFinder, or Multi-Access units. The Auto-Discover Devices command is in the Edit Menu.

When invoked, the Auto Discovery Monitor screen will appear and will display FaxFinders, CallFinders,

and Multi-Access units on the system and identify each (with Host Name, IP Address, and Mac Address).

It will not discover devices outside your network. For example, if the IP address of the computer running

Device Manager is 134.146.8.90, this feature would discover such devices only in the 134.146.8.x

network, but not in 134.146.10.x or other networks.

Auto Discovery. You initiate the command from the Edit menu. A list of devices will soon appear in the

Auto Discovery Monitor window.

Figure 6-7 & 6-8: Auto discovery

The polling process takes a few minutes to complete. (The Auto Discovery Monitor will only detect

FF100, FF110, FF200, and CF220-DID units that have been restarted within the past 10 minutes. This

limitation does not apply to other models.) After a device has been detected you can add it to the group

of devices that the Device Manager software is serving by entering the appropriate Username and

Password for the discovered unit in the Device Manager’s Add Device Address screen.

Viewing Parameters of a Selected Device. If you double-click on a device in the list in the Auto-

Discovery Monitor’s main screen, another screen with details about that device will appear. That second

screen specifies the device’s Mac Address, IP-related parameters, and presents blank fields for its

Username (User ID), and password.

Figure 6-9: Device details

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Keine Kommentare

Multitech CF220 Betriebsanweisung Seite 57