Multitech CF220 Betriebsanweisung PDF herunterladen (Seite 27)

Chapter 3: CallFinder Server Installation

Multi-Tech Systems, Inc. CF220-DID CallFinder User Guide 27

2. Setting Admin PC to Startup IP Address

a. Connect a PC to your network.

b. Set the PC’s IP address to 192.168.2.x subnet (using any address excluding 192.168.2.1).

Windows XP

a. From the Windows desktop, right-click on “My

Network Places,” and select “Properties.”

b. In the Network Connection screen, right-click on

“Local Area Connection.”

c. In the Local Area Connection Properties screen,

on the “General” tab, scroll to the “Internet Protocol

(TCP/IP)” entry and select it. Click “Properties.”

d. In the Internet Protocol (TCP/IP) Properties

screen, record the existing IP address. Then reset the

IP address to 192.168.2.2.

Windows 2000

a. From the Windows desktop, right-click on “My

Network Places,” and select “Properties.”

b. In the Network and Dialup Connections screen,

right-click on “Local Area Connection” and select

“Properties.”

c. In the Local Area Connection Properties screen,

select the “Internet Protocol (TCP/IP)” entry. Click

“Properties.”

d. In the Internet Protocol (TCP/IP) Properties screen,

record the existing IP address. Then reset the IP

address to 192.168.2.2.

3. Logging In (I)

a. Bring up a Web browser on your PC. At the browser’s address line, type the default IP address of the

CallFinder (http://192.168.2.1) and then press Enter.

b. The Login screen will appear.

At this point you can be assured that the CallFinder is connected to the network.

If the Login screen does not appear, see item #1, “What if I can’t see the web page for my

CallFinder?” in the Troubleshooting section.

c. At the Login screen, enter admin (all lower case) in the User Name field.

d. Enter admin (all lower case) in the Password field.

e. Click the Login button. The Web Management Home screen will appear. From this screen, you can

access all of the CallFinder software screens.

4. Setting CallFinder IP Addresses

a. In the CallFinder Administration screen, go to the IP Configuration fields.

Figure 3-5: IP configuration

b. Fill in the IP information that applies to your CallFinder Server unit. The fields for “IP Address,”

“Subnet Mask,” “Default Gateway” and “Name Server” are required. A “Secondary Name Server”

may be considered optional.

c. Click Update. The CallFinder will adopt the new IP address 5 seconds after the Update command is

invoked.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech CF220 Betriebsanweisung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech CF220