Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 29)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 29

Example 2

This example provides a sample RouteFinder configuration and related address scheme for an

application employing LAN-to-LAN IPSec Pass-Through communication. This is an example on how to

configure an RF550VPN/RF560VPN at Site A and an RF550VPN/RF560VPN behind a NAT box at Site

B, so Site A and B can communicate through a secure connection over the Internet using IPSec Pass-

Through. This example deals with Site B using a static and dynamic IP address.

The diagram shows a RouteFinder 550VPN, but you can also use a RouteFinder 560VPN.

Note: Make sure that all routers between both SSH IPSec ends can route IP protocol 50 (IPSec).

Sometimes routers are configured to route only TCP (protocol 6), UDP (protocol 17) and ICMP

(Protocol 1) and drop all other protocols. VPN routers configured that way won’t work with IPSec!

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 41 42

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 29