Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 31)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 31

Software Configuration

Example 2: Configuration Procedure at Site A

Note: To configure the RF550VPN/RF560VPN at Site A follow the same procedure as in example 1, but

change the following items in the RF550VPN/RF560VPN configuration:

Click the button on the left side of the screen for VPN Settings. Use this screen to setup your LAN-

to-LAN VPN connection.

In the Connection Name field, type a name that identifies for you a connection that you would like to

make. (Ex: Site-B) Click the Add button.

The VPN Settings screen for entering specific VPN settings will display. The Connection Name

(Site-B) defaults into the first field. Enter the following settings:

a) Select Enable UID.

b) Local IPSec Identifier – Enter an IP address that identifies the Local IPSec for this connection.

(Ex: 204.26.122.103)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 41 42

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 31