Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 33)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 33

Example 2: NAT Box Configuration at Site B

Configure the NAT box for IPSec Pass-Through by specifying the IP address and subnet mask assigned

by the ISP for Site B (Ex: 204.26.122.3). Then specify the ISP Gateway Address. (Ex: 204.26.122.103)

This is the same as the NAT box in example 1, but for this example, the LAN connection needs to

be set to 192.168.0.1

Example 2: RF550VPN/RF560VPN Configuration at Site B

Connect a workstation to one of the RF550VPN/RF560VPN’s LAN ports via Ethernet for Site B.

Note: It is assumed that the IP Address of the RouteFinder’s LAN at Site B (Ex: 10.10.10.1) has

already been changed from it’s default (192.168.2.1) so it does not conflict with the IP Address of the

RouteFinder’s LAN at Site A (Ex: 192.168.2.1).

Set the workstation IP address to 10.10.10.x subnet.

3. Apply power to the RF550VPN/RF560VPN RouteFinder and allow the LEDs to stabilize on the unit.

Bring up your Web browser on the workstation. At the browser’s address line, type the Gateway

address of http://10.10.10.1 and press the Enter key.

5. After typing the IP Address in the web browser, the RF550VPN/RF560VPN main menu displays.

On the Main Menu, click the Setup Wizard button. The Password dialog box displays.

Type admin (admin is the default user name) in the user name box and leave the password box

empty.

Note: To change your password after logging in, select the Advanced Settings button and

Administrative Settings.

Click OK. The Setup Wizard screen displays a step-by-step process that lets you input all of the

basic settings to configure your RF550VPN/RF560VPN.

Select the Time Zone, and then click the Next button to continue.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 41 42

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 33