Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 2)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 2

How-To: RF550VPN/RF560VPN Using a NAT Box with

IPSec Pass-Through

This publication may not be reproduced, in whole or in part, without prior expressed written permission

warranty with respect to the contents hereof and specifically disclaims any implied warranties of

merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the

right to revise this publication and to make changes from time to time in the content hereof without

obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.

Reference Guide Number: S000259C

Revision Date Description

A 06/07/02 Initial release.

B 04/17/03 Changes for software Version 4.64.

C 07/07/03 Add RF560VPN.

The examples on the following pages illustrate:

SSH Sentinel IPSec client behind a NAT box doing IPSec Pass-Through to a

RF550VPN/RF560VPN.

2. RF550VPN/RF560VPN, behind a NAT box, doing IPSec Pass-Through to another

RF550VPN/RF560VPN.

The RouteFinder software is pre-installed on the RF550VPN/RF560VPN RouteFinder.

RF550VPN/RF560VPN firmware version 4.62 or higher is required to support IPSec Pass-Through.

Initial configuration is required in order for you to run the RouteFinder software and begin operation. The

browser-based interface eases VPN configuration and management. The VPN functionality is based on

IPSec and PPTP protocols and uses 168-bit Triple DES encryption to ensure that your information

remains private.

Caution: Use a safe Password! Your first name spelled backwards is not a sufficiently safe password; a

password such as xfT35$4 is better.

1 2 3 4 5 6 7 ... 41 42

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 2