Multitech MTPSR1-202ST Betriebsanweisung PDF herunterladen (Seite 29)

Chapter 4 - ProxyServer Software

MTPSR1-202ST

WAN Port Setup

The Parameter Configuration dialog box displays the network switch type and the US Parameters or

the Europe Parameters, depending on the switch type selected. In the first example (below), the

default

US Parameters are displayed and are available for editing purposes. The uppermost text box

on the dialog box is not available for editing as it is used only for adding the names of

new

parameter

configurations. The Net Switch Type is also unavailable as it is the switch type that was defined for

this particular configuration.

General Parameters

Data TEI (Terminal Endpoint Identifier) - You may have received a fixed TEI (a number from 0 to 63)

from your provider; if so, then select that number from the list in the Data TEI box. However, if the

central office switch assigns a dynamic TEI each time your ProxyServer connects to the network,

then leave it set to the default, “Auto TEI.” If you have multiple ProxyServers attached to a network

terminator bus, you may want to set the Data TEI to ”Disabled.”

Voice TEI - You may have received a fixed TEI (a number from 0 to 63) from your provider; if so, then

select that number from the list in the Voice TEI box. However, if the central office switch assigns a

TEI each time your ProxyServer connects to the network, then leave it set to “Auto TEI.” Again, if you

have multiple ProxyServers attached to a network terminator bus, you may want to set the Voice TEI

to “Disabled.”

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 103 104

Keine Kommentare

Multitech MTPSR1-202ST Betriebsanweisung Seite 29