Multitech MTCMR-E1 Bedienungsanleitung PDF herunterladen (Seite 67)

Part 3 – AT Commands for SocketWireless Wi-Fi- Devices

Universal IP AT Commands Reference Guide 67

These commands are for the SocketEthernet IP (MT100SEM-IP) and the SocketWireless Wi-Fi (MT810SWM-IP).

Set Commands

#TELNET – Start/Stop Telnet Session

Description: Starts and stops a Telnet session.

Note: The module must be reset to put the command into effect.

Syntax: AT#TELNET=<0,1>

AT#TELNET? Read or display the current setting.

Values: 0 - Stop Telnet session.

1 - Start Telnet session; wait for remote to Telnet in.

Default: 0

Example: AT#TELNET?

#TELNETPORT– Set Telnet Port

Description: Sets Telnet port.

Note: The module must be reset to put the command into effect.

Syntax: AT#TELNETPORT = <port number>

AT#TELNETPORT? Read or display the current setting (or AT#VTELNET or AT#VALL)

Values: 1 to 65535

Default: 23

Example: AT#TELNETPORT?

#TELNETUSER – Set Telnet User

Description: Sets Telnet user.

Note: The module must be reset to put the command into effect.

Syntax: AT#TELNETUSER= “<64 char string>”

AT# TELNETUSER? Read or display the current setting (or AT#VTELNET or AT#VALL).

Default: admin

Example: AT#TELNETUSER?

admin

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 118 119

Keine Kommentare

Multitech MTCMR-E1 Bedienungsanleitung Seite 67