Multitech MTCMR-E1 Bedienungsanleitung PDF herunterladen (Seite 66)

Chapter 11–General AT Commands

66 Universal IP AT Commands Reference Guide

#BOOTMSG – Enable/Disable Boot Message

Description: Enables/disables the boot message.

Syntax: AT#BOOTMSG=<0,1>

AT#BOOTMSG? Read or display the current setting.

Values: 0 - Disable

1 - Enable

Default: 1

Examples: AT#BOOTMSG?

AT#BOOTMSG=1

AT#BOOTMSG?

AT#BOOTMSG=0

#WATCHDOG – Enable/Disable Watchdog

Description: Enable/disable Watchdog for the system – reset on HANG.

Note: The module must be reset to put the command into effect.

Syntax: AT#WATCHDOG=<0,1>

AT#WATCHDOG?

Values: 0 - Disable Watchdog

1 - Enable Watchdog

Default: 1

Example: AT#WATCHDOG?

#WATCHDOGTIMER – Watchdog Timer

Description: Sets the Watchdog timer in milliseconds.

Note: The module must be reset to put the command into effect.

Syntax: AT#WATCHDOGTIMER=<value>

AT#WATCHDOGTIMER? Read or display the current setting.

Values: Maximum milliseconds that can be entered is 7000

Default: 1000ms

Example: AT#WATCHDOGTIMER?

4000

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 118 119

Keine Kommentare

Multitech MTCMR-E1 Bedienungsanleitung Seite 66