Multitech MTCMR-E1 Bedienungsanleitung Seite 61
- Seite / 119
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Part 3 – AT Commands for SocketWireless Wi-Fi- Devices
Universal IP AT Commands Reference Guide 61
These commands are for SocketWireless Wi-Fi Devices.
Set Commands
#DHCP – DHCP On or Off
Description: Enables or disables the DHCP client. If the DHCP client is enabled, the module will take the IP
address from DHCP server. If DHCP client is disabled, the module will take the static IP address
configured for the module.
Note: The module must be reset to put the command into effect.
Syntax: AT#DHCP=<0,1>
AT#DHCP? Read or display the current setting.
Values: 0 - Turn off DHCP (sets IP Address, Netmask, and Gateway back to defaults)
1 - Turn on DHCP (automatically assigns IP Address, Netmask, and Gateway)
Default: 0
#IPADDR – Set Static IP Address
Description: Sets the static IP Address.
Note: The module must be reset to put the command into effect.
Syntax: AT#IPADDR="<IP Address value>"
AT#IPADDR? Read or display the current setting.
Values: IP Address in dotted decimal notation (xxx.xxx.xxx.xxx) "x" stands for a number between 0-
255. 255 is the maximum value in an xxx group.
Default: 192.168.2.3
#IPGATEWAY – Set Gateway Address
Description: Sets the default gateway address. The view of get command shows whether the address is
statically configured or obtained from the DHCP server.
Note: The module must be reset to put the command into effect.
Syntax: AT#IPGATEWAY="<gateway address value>"
AT#IPGATEWAY? Read or display the current setting.
Values: IP Address in dotted decimal notation (xxx.xxx.xxx.xxxx). "x" = a number between 0-255.
Default: 192.168.2.1
#IPNETMASK – Set Subnet Mask
Description: Sets the subnet mask.
Note: The module must be reset to put the command into effect.
Syntax: AT#IPNETMASK="<Subnet Mask value>"
AT#IPNETMASK? Read or display the current setting.
Values: IP Address in dotted decimal notation (xxx.xxx.xxx.xxxx). "x" = a number between 0-255.
Default: 255.255.255.0
- Universal IP 1
- Contacting Multi-Tech 2
- Contents 3
- Part 1 – AT Commands 10
- Set Commands 11
- &D – DTR Option 12
- &S – DSR ON or OFF 12
- <parity> 13
- +IFC – Set Flow Control 14
- +IPR – Set Serial Speed 14
- Display Commands 16
- Syntax: AT#VALL 18
- Responses – MT100SEM-IP only 18
- #RECiADD – Set Email Address 21
- #SMTPPW – Set SMTP Password 23
- #SMTPUN – Set SMTP User Name 23
- #POP3UN – Set POP3 User Name 28
- Display Command 29
- #FTPUN – Set FTP User Name 31
- #FTPPW – Set FTP Password 31
- Chapter 4 – FTP AT Commands 32
- #TCPTXDELAY – Time Delay 36
- Chapter 5 – TCP AT Commands 38
- Chapter 6 – UDP AT Commands 46
- #UDPPORT – UDP Port Number 47
- #UDPDLEMODE – Set DLE Mode 48
- Part 2 – AT Commands for the 53
- Part 3 – AT Commands 60
- Chapter 10 – IP AT Commands 62
- #WLANSSID – SSID of WLAN 70
- Chapter 13–WLAN AT Commands 72
- #WLAN? – WLAN Module 77
- Part 4 – 78
- Chapter 14 – AT Commands 80
- #ISPPW – Set ISP Password 84
- #ISPUN – Set ISP User Name 85
- Part 5 – GPIO AT Commands 91
- About GPIO 92
- Part 6 – AT Commands 95
- #GPSPORT – Set GPS Host Port 96
- - Disable 99
- (Disabled) 99
- GPS Message Syntax 100
- GPS Message Examples 101
- GPS Configuration Examples 101
- Introduction 102
- NMEA Protocol Overview 102
- SUPPORTED MESSAGE LIST 102
- NMEA MESSAGES 103
- GLL – Latitude/Longitude 104
- Part 7 – Appendixes 107
- Response Messages 108
- Error Codes 109
- Commands 110
- Responses 110
- TCP Socket Response Messages 112
- Act as a TCP Client: AT#OTCP 113
Verwandte Produkte und Handbücher für Vernetzung Multitech MTCMR-E1
Vernetzung Multitech MTCMR-G2 Betriebsanweisung
(56 Seiten)
(56 Seiten)
Vernetzung Multitech MT2834ZPX Betriebsanweisung
(15 Seiten)
(15 Seiten)
Vernetzung Multitech MT56DSU2 Bedienungshandbuch
(39 Seiten)
(39 Seiten)
Vernetzung Multitech MTCBA-C Betriebsanweisung
(16 Seiten)
(16 Seiten)
Vernetzung Multitech RF760 Bedienungsanleitung
(16 Seiten)
(16 Seiten)
Vernetzung Multitech MTCBA-C Betriebsanweisung
(58 Seiten)
(58 Seiten)
Vernetzung Multitech FR2201 Betriebsanweisung
(85 Seiten)
(85 Seiten)
Vernetzung Multitech FF200 Betriebsanweisung
(68 Seiten)
(68 Seiten)
Vernetzung Multitech MT1932ZDXI Betriebsanweisung
(177 Seiten)
(177 Seiten)
Vernetzung Multitech GFU19 Betriebsanweisung
(30 Seiten)
(30 Seiten)
Vernetzung Multitech MTR-C2 Bedienungsanleitung
(10 Seiten)
(10 Seiten)
Vernetzung Multitech MTMC8-USB Betriebsanweisung
(28 Seiten)
(28 Seiten)
Vernetzung Multitech RF760 Bedienungsanleitung
(12 Seiten)
(12 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern