Multitech MTA128NT Bedienungsanleitung PDF herunterladen

Avaya Communication Manager, Release 3.1

Known Issues and Workarounds for the S8400 Media Server

ID and Keywords Symptom: Workaround

a40001s

...The command displays incorrect length (in seconds) for

announcements that have changed by any means other than recording

via a FAC (Feature Access Code).

Manually reset the circuit pack.

Announcement,

Administration,

Maintenance, TN

Circuit Pack

IF:

- An announcement changes due to a method other than recording via a

FAC (Feature Access Code), and

- You run the command 'list integrated-annc-board'…

THEN:

a31003d

…That extension must be different from the extension you enter in the

Group Extension field on page 1 of the hunt group form.

Click the link for a procedural overview which

identifies changes to switch administration for

IA770 INTUITY AUDIX Messaging because of this

difference:

IA770 as centralized voice mail requires different

voice mail number

IF:

- You are using IA770 INTUITY AUDIX Messaging as a centralized voice

mail system that supports multiple switches in a DCS+/QSIG

environment, and

- On the hunt group form, on page 2, you enter an extension in the Voice

Mail Number field…

THEN:

a30001d

...The attempt does not succeed. Documentation erroneously implies

that this configuration is supported.

Do not attempt to use this circuit pack in those

media gateways.

IF:

- You attempt to use a TN2602 circuit pack in a G600 or CMC1 Media

Gateway...

THEN:

a00004s

…Filesync to LSPs does not work properly, and other transmissions

through the server firewall do not behave as expected.

Even if nothing appears to have changed after

creating this disparity between the primary server

and the LSP, always re-administer the firewall. To

do this:

1. Go to the Set LAN Security Web page and click

the Advanced Settings button.

2. Review the settings. Make sure all needed ports

are open, including shell on port 514.

3. Click the Set Security button.

On a configuration with two servers, do this on both

servers.

Note: old Release Notes ID number = 000a04s

LSP (Local Survivable

Processor), Upgrade,

Security, File

Transfer, Maintenance

IF:

- The primary server is running Release 1.3 or earlier of Communication

Manager, and

- An LSP is running Release 1.3.1 or later…

THEN:

070396s

…The voice mail message includes both the recorded message and the

music played to a call on hold.

Contact your technical support organization and

request that they look for the signature of this

problem. If the signature is present, request and

apply the latest approved combo patch that

includes patch 13384.

Inhaltsverzeichnis

Seite 1

Avaya Communication Manager, Release 3.1Known Issues and Workarounds for the S8400 Media ServerID and Keywords Symptom: Workarounda40001s...The comman

Seite 2

ID and Keywords Symptom: Workaround070090s…The backup might time out with the error:fileset name - /etc/opt/ecs/backup//xln_ds.conf NOSPOOL 0, NOLOCK

Seite 3

ID and Keywords Symptom: Workaround064268s…Those trunks are not released when the conference ends.A reset system 2 releases the trunks. Contact your

Seite 4

ID and Keywords Symptom: Workaround063030s…The calling number is not available even for an emergency (911) call.On the trunk group form, set the field

Seite 5

ID and Keywords Symptom: Workaround061663s…The button lamp on the bridged appearance for a Toshiba SIP Phone incorrectly does not light. In general, c

Seite 6

ID and Keywords Symptom: Workaround060070s…The call might drop about 8 seconds after connecting.On the hunt group form, set Send CPN To AUDIX to No.

Seite 7

ID and Keywords Symptom: Workaround052044s…The command might not work.From the maintenance web pages, shut down the server and then restart it.Adminis

Seite 8

ID and Keywords Symptom: Workaround040474s…The output omits the zero in displaying the version number. For instance, firmware release 1.04 inaccuratel

Seite 9

ID and Keywords Symptom: Workaround021533h…The version in bank A (where that image resides) appears as 0.0.0.To see the version number of the Embedded