Multitech MT5634ZBAV Betriebsanweisung PDF herunterladen (Seite 24)

User Guide

Changing the Speaker Jumper

The speaker jumper (J8) is next to the external speaker jack (see

Figure 2-2).

• To use the MT5634ZBAV modem with a monophonic external

speaker, remove the jumper plug from the J8 jumper pins. You can

store it by placing it on one jumper pin.

• To use the MT5634ZBAV modem with a stereo speaker or sound

card, place the jumper plug on both pins of the J8 jumper. This is

the factory default position.

Changing the Dial-Up/Leased-Line Jumpers

As shipped from the factory, your modem is configured for normal dial-

up operation. That is, the modem must dial a phone number to connect

to another modem. To use the modem on a leased line, you must

change jumper J10 to select leased line operation, and J11 to select

whether it will be the originating or the answering modem. (If dial-up

operation is selected, J11 has no effect.) See Figure 2-2 for jumper

locations and positions.

• To use the modem on a leased line, move the J10 jumper plug from

the default dial-up position to the leased line position.

• To make the modem the originating modem on the leased line,

move the J11 jumper plug to the originate position.

• To make the modem the answering modem on the leased line, leave

the J11 jumper plug in the factory default answer position.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 169 170

Keine Kommentare

Multitech MT5634ZBAV Betriebsanweisung Seite 24