Multitech MT5634ZBAV Betriebsanweisung Seite 115

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 170
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 114
7 Solving Problems
105
Try resetting your modem by turning it off and on. If you are using
DOS or Windows 3.1 communications software, make sure the ini-
tialization string includes &F as the first command, to cancel any
“leftover’ command that could affect the modem’s operation.
If you don’t get an
OK
, the problem may still be in the communica-
tions software. Make sure you have done whatever is necessary in
your software to make a port connection. Not all communications
programs connect to the COM port automatically. Some connect
when the software loads and remain connected until the program
terminates. Others can disconnect without exiting the program. The
modem’s TR indicator lights to show that the software has taken
control of the modem through the COM port.
Your communications software settings may not match the physical
port the modem is connected to. The serial cable might be plugged
into the wrong connector—check your computer documentation to
make sure. Or you might have selected a COM port in your software
other than the one the modem is physically connected to—compare
the settings in your software to the physical connection.
If the modem is on, the cable is plugged into the correct port, the
communications software is configured correctly, and you still don’t
get an
OK
, the fault might be in the serial cable. Make sure it is firmly
connected at both ends.
Is this the first time you have used the cable? If so, it may not be
wired correctly. Check the cable description on the packaging to
make sure the cable is the right one for your computer.
Peripheral expansion cards, such as sound and game cards, might
include a serial port preconfigured as COM1 or COM2. The extra seri-
al port, or the card itself, may use the same COM port, memory
address, or interrupt request (IRQ) as your communications port. Be
sure to disable any unused ports.
Seitenansicht 114
1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare

Campbell CVF4 podręczniki

Instrukcje obsługi i podręczniki użytkownika dla Nie Campbell CVF4.
Dostarczamy 2 pdf podręczników Campbell CVF4 do pobrania za darmo według typów dokumentów: Instrukcja Obsługi






Więcej produktów i instrukcji dla Nie Campbell

Modele Rodzaj dokumentu
SC-USB Podręcznik Użytkownika   Campbell SC-USB User guide, 26 strony
SC-USB Instrukcja Obsługi   Campbell SC-USB Product manual, 36 strony
KH20 Instrukcja Obsługi   Campbell KH20 Instruction manual [en] , 48 strony
SDM-CD16D Podręcznik Użytkownika   Campbell SDM-CD16D User guide, 17 strony
CS505 Instrukcja Użytkownika   Model CS205 10-Hour Fuel Temperature Stick [en] , 10 strony
25458 Instrukcja Użytkownika   25458 DIN-Rail Terminal Kit [en] [it] , 10 strony
CS210 Instrukcja Użytkownika   CS210 Manual - Campbell Scientific, 14 strony
TX312 Instrukcja Użytkownika   Snotel Goes Manual R2b, 10 strony
SDM-CD16D Dokumentacja   Campbell SDM-CD16D Specifications, 20 strony
TDR Instrukcja Użytkownika   Comparison of laboratory TDR soil water measurements, 16 strony
CompactFlash CFM100 Instrukcja Obsługi   Campbell CompactFlash CFM100 Instruction manual, 32 strony
SC932C 9-Pin Podręcznik Użytkownika   Campbell SC932C 9-Pin User guide, 16 strony
CompactFlash CFM100 Instrukcja Obsługi   Campbell CompactFlash CFM100 Product manual [en] , 28 strony
CS525 Instrukcja Użytkownika   CS525 - Campbell Scientific, 2 strony
TX320 Instrukcja Użytkownika   La Désirade et Deshaies : choix technologiques et - Refmar, 14 strony
RTMS SYSTEMS Instrukcja Obsługi   Campbell RTMS SYSTEMS Instruction manual, 58 strony
RWIS STATIONS Instrukcja Użytkownika   Flood, Road, and Weather Data in Colorado, 2 strony