Multitech MT5634ZBA-USB Betriebsanweisung PDF herunterladen (Seite 35)

Chapter 4 - AT Commands, S-Registers and Result Codes

Result Codes

In command mode your modem can send responses called result codes to your

computer. Result codes are used by communications programs and can also appear on

your monitor.

Terse Verbose Description

0OK Command executed

1 CONNECT Modem connected to line

2 RING Ring signal detected

3 NO CARRIER Carrier signal lost or not detected

4 ERROR Invalid command

5 * CONNECT 1200 Connected at 1200 bps

6 NO DIALTONE No dial tone detected

7 BUSY Busy signal detected

8 NO ANSWER No answer at remote end

10* CONNECT 2400 Connected at 2400 bps

11* CONNECT 4800 Connected at 4800 bps

12* CONNECT 9600 Connected at 9600 bps

13* CONNECT 14400 Connected at 14400 bps

14* CONNECT 19200 Connected at 19200 bps

24* CONNECT 7200 Connected at 7200 bps

25* CONNECT 12000 Connected at 12000 bps

26* CONNECT 16800 Connected at 16800 bps

40* CONNECT 300 Connected at 300 bps

55* CONNECT 21600 Connected at 21600 bps

56* CONNECT 24000 Connected at 24000 bps

57* CONNECT 26400 Connected at 26400 bps

58* CONNECT 28800 Connected at 28800 bps

59* CONNECT 31200 Connected at 31200 bps

60* CONNECT 33600 Connected at 33600 bps

70* CONNECT 32000 Connected at 32000 bps, 56K rate

71* CONNECT 34000 Connected at 34000 bps, 56K rate

72* CONNECT 36000 Connected at 36000 bps, 56K rate

73* CONNECT 38000 Connected at 38000 bps, 56K rate

74* CONNECT 40000 Connected at 40000 bps, 56K rate

75* CONNECT 42000 Connected at 42000 bps, 56K rate

76* CONNECT 44000 Connected at 44000 bps, 56K rate

77* CONNECT 46000 Connected at 46000 bps, 56K rate

78* CONNECT 48000 Connected at 48000 bps, 56K rate

79* CONNECT 50000 Connected at 50000 bps, 56K rate

80* CONNECT 52000 Connected at 52000 bps, 56K rate

81* CONNECT 54000 Connected at 54000 bps, 56K rate

82* CONNECT 56000 Connected at 56000 bps, 56K rate

88 DELAYED Delay is in effect for the dialed number

89 BLACKLISTED Dialed number is blacklisted

90 BLACKLIST FULL Blacklist is full

100 CONNECT 28000 Connected at 28000 bps, V.90 rate

101 CONNECT 29333 Connected at 29333 bps, V.90 rate

102 CONNECT 30666 Connected at 30666 bps, V.90 rate

103 CONNECT 33333 Connected at 33333 bps, V.90 rate

104 CONNECT 34666 Connected at 34666 bps, V.90 rate

105 CONNECT 37333 Connected at 37333 bps, V.90 rate

106 CONNECT 38666 Connected at 38666 bps, V.90 rate

107 CONNECT 41333 Connected at 41333 bps, V.90 rate

108 CONNECT 42666 Connected at 42666 bps, V.90 rate

109 CONNECT 45333 Connected at 45333 bps, V.90 rate

110 CONNECT 46666 Connected at 46666 bps, V.90 rate

111 CONNECT 49333 Connected at 49333 bps, V.90 rate

112 CONNECT 50666 Connected at 50666 bps, V.90 rate

113 CONNECT 53333 Connected at 53333 bps, V.90 rate

114 CONNECT 54666 Connected at 54666 bps, V.90 rate

* EC is added to these result codes when the extended result codes configuration option is enabled. EC is replaced by one of the following

codes, depending on the type of error control connection:

V42bis —V.42 error control (LAP-M) and V.42bis data compression

V42 —V.42 error control (LAP-M) only

MNP5 —MNP 4 error control and MNP 5 data compression

MNP4 —MNP 4 error control only

NoEC —No error control protocol).

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT5634ZBA-USB Betriebsanweisung Seite 35

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Multitech MT5634ZBA-USB