Multitech MT5634ZBA-USB Betriebsanweisung PDF herunterladen (Seite 28)

MT5634ZBA-USB User Guide

Command: &Tn V.54 Test Commands

Values: n = 0, 1, 3 or 6

Default: None

Description:&T0 Abort. Stop any test in progress.

&T1 Local analog loopback test.

&T3 Local digital loopback test.

&T6 Remote digital loopback test.

Note: To stop a test, you must use the escape sequence (+++AT) before typing AT&T0.

Command: &V Display Current Settings

Values: n/a

Description: Displays the active modem settings, including the callback security settings if callback se-

curity is enabled. If the setup password has been entered, it also displays the callback secu-

rity passwords.

Command: &Wn Store Current Configuration

Values: n = 0

Default: None

Description:&W0 Stores current modem settings in nonvolatile memory and causes them to be loaded at

power-on or following the ATZ command instead of the factory defaults. See also the &F

command.

&W1 Clears user default settings from nonvolatile memory and causes the factory defaults to be

loaded at power-on or following the ATZ command.

Command: &Yn Select Stored Configuration for Hard Reset

Values: n = 0

Default: 0

Description:&Y0 Select stored configuration 0 on power-up. (For backward compatibility with some soft-

ware.)

&Y1 Not supported—responds ERROR.

Command: &Zy=x Store Dialing Command

Values: y = 0–1

x = Dialing command

Default: None

Description: Stores dialing command x in memory location y. Dial the stored number using the com-

mand ATDS=y.

Command: \An Select Maximum MNP Block Size

Values: n = 0, 1, 2, or 3

Default: 3

Description:\A0 64-character maximum.

\A1 128-character maximum.

\A2 192-character maximum.

\A3 256-character maximum.

Command: \Bn Transmit Break

Values: n = 0–9 in 100 ms units

Default: 3

Description: In non-error-correction mode only, sends a break signal of the specified length to a remote

modem. Works in conjunction with the \K command.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT5634ZBA-USB Betriebsanweisung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Multitech MT5634ZBA-USB