Multitech MT5634ZBA-USB Betriebsanweisung PDF herunterladen (Seite 30)

MT5634ZBA-USB User Guide

Command: \Qn Flow Control Selection

Values: n = 0, 1, or 3

Default: 3

Description:\Q0 Disable flow control (same as &K0).

\Q1 XON/XOFF software flow control (same as &K4).

\Q2 CTS-only flow control. Not supported.

\Q3 RTS/CTS hardware flow control (same as &K3).

Command: \Tn Inactivity Timer

Values: n = 0, 1–255

Default: 0

Description:\Tn Sets the time (in minutes) after the last character is sent or received that the modem waits

before disconnecting. A value of zero disables the timer. Applies only in buffer mode.

Note: You can also set the inactivity timer by changing the value of S30.

Command: \Vn Protocol Result Code

Values: n = 0, 1, or 2

Default: 1

Description:\V0 Disable the appending of the protocol result code to the DCE speed.

\V1 Enable the appending of the protocol result code to the DCE speed.

\V2 Same as \V1.

Command: \Xn XON/XOFF Pass-Through

Values: n = 0 or 1

Defaults: 0

Description:\X0 Modem responds to and discards XON/XOFF characters.

\X1 Modem responds to and passes XON/XOFF characters.

Command: -Cn Data Calling Tone

Values: n = 0 or 1

Defaults: 0

Description:-C0 Disable V.25 data calling tone to deny remote data/fax/voice discrimination.

-C1 Enable V.25 data calling tone to allow remote data/fax/voice discrimination.

Command: %B View Numbers in Blacklist

Values: n/a

Description: If blacklisting is in effect, AT%B displays the numbers for which the last call attempted in

the previous two hours failed. In countries that do not require blacklisting, the ERROR re-

sult code appears.

Command: %Cn Data Compression Control

Values: n = 0 or 1

Default: 1

Description:%C0 Disable V.42bis/MNP 5 data compression.

%C1 Enable V.42bis/MNP 5 data compression.

Command: %DCnAT Command Control

Values: n = 0 or 1

Default: 0

Description: %DC0 The modem responds to AT commands.

%DC1 The modem ignores AT commands.

Note: The modem will respond to AT%DC for 10 seconds after power-up.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT5634ZBA-USB Betriebsanweisung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Multitech MT5634ZBA-USB