Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 4)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Using Advanced Settings 4

Example One – Section One

Configuring the RF550VPN/RF560VPN as a Virtual Server

Use this procedure to configure the RF550VPN/RF560VPN as a virtual server that supports a Telnet

connection. This configuration allows a Windows 2000 Remote Client to Telnet through the VPN to a

Windows 2000 System located on the LAN.

1. Connect a workstation to one of the RF550VPN/RF560VPN’s LAN ports via Ethernet at site A.

2. Set the workstation IP address to 192.168.2.x subnet.

3. Apply power to the RF550VPN/RF560VPN RouteFinder and allow the LEDs to stabilize on the unit.

4. Bring up your web browser on the workstation. At the web browser’s address line, type the Gateway

address of http://192.168.2.1 and press the Enter key.

Note: Make sure your workstation’s IP address is in the same network as the router’s address.

WINIPCFG and IPCONFIG are tools for finding a computer’s default gateway and MAC address. In

Windows 98/Me you can type WINIPCFG. In Windows 2000/NT, you can type IPCONFIG.

5. The Password dialog box displays.

6. Type admin (admin is the default user name) in the user name box and leave the password box

empty.

Note: To change your password after logging in, select the Advanced Settings button and

Administrative Settings.

7. Click OK.

1 2 3 4 5 6 7 8 9 ... 26 27

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 4