Multitech MultiConnect Adapter Serial-to-Ethernet Adapter with IP Bedienungsanleitung PDF herunterladen (Seite 21)

Viewing Port Details

Choosing the Protocol:

Two options are provided:

¾ If Telnet option is selected, you could specify the port number configured in the IPModule. This

port is #5000 (decimal) by default in the IPModule.

o To disable Raw Mode in the IPModule:

Use the following commands to set the IPModule

 set serial s0 raw-dialout disable

 set ip telnet raw-mode disable

¾ If Raw option is selected, you could specify the port number as configured in the IPModule. This

port is #5000 (decimal) by default in the IPModule

o To enable Raw Mode in the IPModule:

Use the following commands to set the IPModule

 set serial s0 raw-dialout enable

 set ip telnet raw-mode enable

1 2 ... 16 17 18 19 20 21 22 23 24

Keine Kommentare

Multitech MultiConnect Adapter Serial-to-Ethernet Adapter with IP Bedienungsanleitung Seite 21