Multitech MTS2WFA-R Bedienungsanleitung PDF herunterladen (Seite 9)

Chapter 2 – PING Commands

Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D) 9

Chapter 2 – PING Commands

#PINGNUM – Number of PING Requests

Description: This command sets the number of PING echo requests to issue to PINGREMOTE.

Syntax: Set Value: AT#PINGNUM=<Value>

View Value: AT#PINGNUM?

Values: From 1 to 255 inclusive

Default Value: 20

#PINGREMOTE – IP Address of Remote Device

Description: This command sets the IP address of remote device to PING.

Syntax: Set Value: AT#PINGREMOTE=<IP Address>

View Value: AT#PINGREMOTE?

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx)

Default Value: 192.168.1.1

#PINGSTART – PING

Description: Directs the module to start PING requests to the configured PING remote address. The

number of requests to be sent is obtained from the PINGNUM command.

Syntax: Set Value: AT#PINGSTART

Values: PINGNUM

PINGREMOTE

Default Value: None

#PING? – PING Module

Description: Displays PING module related information.

Syntax: AT#PING?

Values: PINGNUM

PINGREMOTE

Default Value: None

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 37 38

Keine Kommentare

Multitech MTS2WFA-R Bedienungsanleitung Seite 9