Multitech MTS2WFA-R Bedienungsanleitung PDF herunterladen (Seite 35)

Chapter 9 – Miscellaneous Commands

Multi-Tech Systems, Inc. AT Commands for the MT800SWM & MTS2WFA (S000425D) 35

#RESET – Restart the Module

Description: Restarts our module from the command prompt.

Syntax: Set Value: AT#RESET

Values: None

Default Value: None

E – Turn Echo ON/OFF

Description: Use this command to turn ON/OFF echoing command at the serial terminal.

Syntax: Set Value: ATE

Values: No parameter values.

Default Value: None

S2 – Escape Sequence

Description: Use this command to change the character for escape sequence.

Syntax: Set Value: ATS2=<+>

Values: 'c' value, which is used as the escape sequence

Default: '+'

#WATCHDOG – Enable/Disable Watchdog

Description: Enable/disable Watchdog for the system – reset on HANG.

Syntax: Set Value: AT#WATCHDOG

View Value: AT#WATCHDOG?

Values: 0: Disable Watchdog

1: Enable Watchdog

Default Value: 1: Enable Watchdog

#WATCHDOGTIMER – Watchdog Timer

Description: Sets the Watchdog timer in milliseconds.

Syntax: Set Value: AT#WATCHDOGTIMER

View Value: AT#WATCHDOGTIMER?

Values: Maximum milliseconds that can be entered is 7000

Default Value: 1000ms

#BOOTMSG – Enable/Disable Boot Message

Description: Enables/disables the boot message.

Syntax: Set Value: AT#BOOTMSG

View Value: AT#BOOTMSG?

Values: 0 Disable

1 Enable

Default: 1 Enable

1 2 ... 30 31 32 33 34 35 36 37 38

Keine Kommentare

Multitech MTS2WFA-R Bedienungsanleitung Seite 35