Multitech RF650VPN Bedienungsanleitung PDF herunterladen (Seite 22)

FriendlyNET VPN Security Router

Encryption

Most internal LAN traffic does not require additional security meas-

ures. If you are transferring sensitive files or other material over the

wireless LAN, you may enable the WEP Security Settings. WEP

stands for "Wired Equivalent Protocol".

Click on either the "40(64) bit" or the "128-bit” radio button to select

which Shared Key you will use, and enter a 10 digit hexadecimal

number into the Key 1 field. Hexadecimal numbers may be alpha-

numeric (numerals 0-9 or letters a-f).

Note: Most wireless network cards utilize the 64-bit algorithm, in-

cluding the Apple Airport card.

Note: Up to 4 WEP Keys may be configured. Each Key number

must be different. Each client must also use the active WEP key to

access the wireless network (the default key is 1).

WEP Security and Apple Airport Wireless Cards

The Apple Airport Wireless Card and the router enter and store the

WEP Security Key differently. From the Airport icon on your com-

puter’s control strip, select the router, and enter $ plus the WEP key

in the password field.

Click Next to enter the new data and to proceed to the Modem Set-

tings page.

2.1.6 Modem Settings

You can configure the router to use a dialup modem if there isn’t a

cable/DSL connection, or as a backup for the cable/DSL connec-

tion. To use the modem dialup, you must select the check box to

enable the modem settings function and enter the required informa-

tion.

Enter the External IP Address only if your ISP requires it, otherwise

leave it at the default settings (0.0.0.0). Enter the desired settings

for the modem. Refer to the modem’s manual for more help in

changing settings.

When you have completed the configuration, click Next to enter the

data and to proceed to VPN Settings.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 75 76

Keine Kommentare

Multitech RF650VPN Bedienungsanleitung Seite 22