Multitech MultiModem rCell Betriebsanweisung PDF herunterladen (Seite 41)

Chapter 3 – Using the Web Management Software

Multi-Tech Systems, Inc. MultiModem rCell User Guide 41

PPP, PPP Configuration Parameters

NAT Configuration Group

NAT: Enable or disable NAT (Network Address Translation). The default is Enable.

Note: For routing to take effect, enable then save the configuration.

Enabling NAT

Your LAN can use one set of IP addresses for internal traffic and a second set of addresses for external traffic. The

router with NAT does the simple IP routing between the LAN interface and the WAN interface. NAT hides the LAN

address behind a single IP address on the wireless side.

Your internal addresses are shielded from the public Internet.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 90 91

MultiModem 1
Contents 3
Chapter 1 – Product Overview 7
Related Documentation 8
Safety Warnings 9
Front Panel 10
Permanently On: 11
Slow flashing state (5 11
Seconds) 11
Fast flashing state (0.3 11
Package Contents 12
Specifications 13
Power Specifications 14
RF Specifications 15
Cellular Information 16
Technical Specifications 17
IN/OUT 18
Making the Connection 19
Using the Reset Button 20
Setting TCP/IP Address 21
Setting a Static IP Address 22
Verifying Signal Strength 25
Verifying Provider Fees 25
Software 26
Navigation bar 27
Submenus 28
General Configuration Group 30
IP Configuration Group 30
Syslog Configuration Group 30
Auto Discovery Group 30
Telnet Configuration Group 31
HTTP Configuration Group 32
Authentication Group 32
General Group 33
Daylight Configuration Group 36
Add Static Routes Group 37
Remote Configuration Group 37
Local Configuration Group 38
NMEA Configuration Group 39
Communication Examples 39
NAT Configuration Group 41
PPP General Group 42
ICMP Keep Alive Check 42
Modem Configuration Group 42
Ack Comment 45
Wakeup-On-Call Examples 46
● Caller ID Configuration 47
Command Description 51
Network Configuration Group 52
Configuring the Network 52
Service Configuration Group 53
Packet Filter Group 54
DNAT Configuration Group 56
GRE Tunnels 58
GRE Tunnels > GRE Tunnels 59
DHCP Server, Subnet Settings 61
DHCP Fixed Configuration 62
IPSec > IPSec 63
Add a New Connection 64
Add an IKE Connection 65
Add Manual Connection 67
Router hardware 70
Tools, Tools Parameters 73
3. Click Upgrade 74
Tools, Save Configuration 75
Statistics & Logs 76
Subnets 82
Industry Canada 86
Appendix C – Environmental 87
Information 87
China ROHS 89

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MultiModem rCell Betriebsanweisung Seite 41

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech MultiModem rCell