Multitech MA100-1M Betriebsanweisung PDF herunterladen (Seite 50)

Appendix F – Modem AT Commands

Multi-Tech Systems, Inc. MultiAccess ACS User Guide 50

Command: &Wn Store Current Configuration

Values: n = 0 or 1

Default: 1

Description: &W0 Stores current modem settings in non-volatile memory and causes them to be

loaded at power-on or following the ATZ command instead of the factory defaults.

See &F command.

&W1 Clears user default settings from non-volatile memory and causes the factory

defaults to be loaded at power-on or following the ATZ command.

Command: &Zy=x Store Dialing Command

Values: y = 0–2 (0–1SMI-Parallel {internal})

x = Dialing command

Default: None

Description: Stores dialing command x in memory location y. Dial the stored number using the command

ATDS=y. See Also the #CBS command, a callback security command.

Command: \An Select Maximum MNP Block Size

Values: n = 0, 1, 2, or 3

Default: 3

Description: \A0 64-character maximum

\A1 128-character maximum

\A2 192-character maximum

\A3 256-character maximum

Command: \Bn Transmit Break

Values: n = 0–9 in 100 ms units

Default: 3

Description: In non-error-correction mode only, sends a break signal of the specified length to a remote

modem. Works in conjunction with the \K command.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 70 71

Keine Kommentare

Multitech MA100-1M Betriebsanweisung Seite 50