Multitech BL-Series Bedienungsanleitung PDF herunterladen (Seite 35)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

Command: -SDR=n Distinctive Ring Control

Values: 0–7

Default: 0

Description: This command enables or disables detection and reporting of distinctive ring. One, two, or

three distinctive ring types can be simultaneously enabled depending upon the value of n.

The detected ring type is reported in the verbose result code by appending the ring type number

to the end of the RING message.

-SDR=0 Disables distinctive ring. Any valid ring detected is reported as RING.

-SDR=1 Enables distinctive ring type 1.

-SDR=2 Enables distinctive ring type 2.

-SDR=3 Enables distinctive ring types 1 and 2.

-SDR=4 Enables distinctive ring type 3.

-SDR=5 Enables distinctive ring types 1 and 3.

-SDR=6 Enables distinctive ring types 2 and 3.

-SDR=7 Enables distinctive ring types 1, 2, and 3.

The supported ring types and ring cadence detection criteria are shown in the following

table:

Distinctive

Ring Type Ring cadence detection criteria

1 2.0 sec. on, 4.0 sec off

2 0.8 sec on, 0.4 sec off, 0.8 sec on, 0.4 sec off

3 0.4 sec on, 0.2 sec off, 0.4 sec on, 0.2 sec off, 0.8 sec on, 0.4 sec off

Command: #CID=n Caller ID

Values: n = 0, 1, or 2

Default: 0

Description: Enables or disables Caller ID recognition and reporting.

#CID=0 Disables Caller ID.

#CID=1 Enables formatted Caller ID reporting of ICLID SDM (Single Data

Message) and MDM (Multiple Data Message) packets.

#CID=2 Enables unformatted Caller ID reporting of any ICLID packet received after

the first RING cycle, including SDM, MDM, or call waiting packets.

#CID? Retrieves the current Caller ID mode from the modem.

#CID=? Returns the mode capabilities of the modem in a list with each element

separated by commas.

MT5600BA LCD:

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Keine Kommentare

Multitech BL-Series Bedienungsanleitung Seite 35