Multitech BL-Series Bedienungsanleitung PDF herunterladen (Seite 28)

AT Commands for the MT5656ZDX, MT5600ZDX, MT5600BA/BL-Series Modems

Multi-Tech Systems, Inc. Commands Reference Guide (PN S000273D)

+MR Modulation Reporting Control Continued

+MCR: Report Syntax: Response: +MCR: <carrier>

<carrier> Alphanumeric code corresponding to the reported carrier.

Defined values are:

B103 For Bell 103

B212 For Bell 212

V21 For V.21

V22 For V.22

V22B For V.22bis

V23C For V.23

V32 For V.32

V32B For V.32bis

V34 For V.34

K56 For K56flex

V90 For V.90

V92 For V.92

+MRR: Report Syntax: Response: +MRR: <tx_rate>,<rx_rate>

<tx_rate> Decimal transmit rate in bits/s.

<rx_rate> Decimal receive rate in bits/s.

Example: +MRR: 28800, 48000

Command: +PSS Use Short Sequence

Description: This command causes a calling modem to force either a V.92 short or full startup sequence

as defined by the +PQC command on the next and subsequent connections.

Syntax: +PSS=<value>

Defined Values: <value> Decimal number corresponding to the selected sequence.

0 The modems decide whether or not to use the short startup procedures. The short startup

procedures can only be used if enabled by the +PQC command. (Default.)

1 Reserved.

2 Forces the use of the full startup procedures on the next and subsequent connections

independent of the setting of the +PQC command.

Result Codes: OK 0 - 2 in V.92 Mode (+MS=V.92)

ERROR Otherwise

Reporting Selected Values:

Command: +PSS?

Response: +PSS: <value>

Example: +PSS: 0 For the default <value>.

Reporting Supported Range of Parameter Values:

Command: +PSS=?

Response: +PSS: (<value> range)

Example: +PSS: (0,1,2)

Command: -QCPC Force Full Startup Procedure Next Connection

Description: This command causes the modem to use full startup procedures on the next connection

attempt regardless of the setting of the +PQC command. After this attempt, the modem will

select the startup procedure as defined by the +PQC command. If a shortened startup

procedure is enabled by the +PQC command, then the quick connect profile will also be

updated on the next connection attempt.

Syntax: -QCPC

Result Code: OK In V.92 Mode (+MS=V.92)

ERROR Otherwise

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech BL-Series Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech BL-Series