Multitech BL-Series Bedienungsanleitung PDF herunterladen (Seite 45)

JUMPER SETTINGS AND MODEM SET-UP

Note :

1. The mechanical jumpers to be shorted as shown above.

2. The jumpers not mentioned to be left open.

4.3. APC-BPU 005/T-M01 (BM-L BPU MOTHERBOARD)

Jumper settings on BPU-M01 as viewed from soldering side are as follows in

general.

. . W9 . . W1

. . W10 . . W2

. . W11 . . W3

. . W12 . . W4

. . W13 . . W5

. . W14 . . W6

. . W15 . . W7

. . W16 . . W8

MSB (always open

for RBM)

MSB (always open

for RBM)

Currently only an Even No BM can be made as a RBM and for RBM-ID, the Most

Significant Bit (MSB) positions in the copy 0 & copy 1 BPU have to be made one, i.e.

left open (no short) so the jumper settings for RBM can be as follows :

JUMPER SETTINGS FOR W1-W8 (BPU COPY 0)

BM NO. SHORTING POSITION FUNCTION

2 W1, W3, W4, W5, W6, W7 Copy id = 82

4 W1, W4, W5, W6, W7 = 86

6 W1, W3, W5, W6, W7 3 = 8A

8 W1, W5, W6, W7 = 8E

10 W1, W3, W4, W6, W7 = 92

12 W1, W4, W6, W7 = 96

14 W1, W3, W6, W7 3 = 9A

16 W1, W6, W7 = 9E

18 W1, W3, W4, W5, W7 = A2

20 W1, W4, W5, W7 = A6

22 W1, W3, W5, W7 = AA

24 W1, W5, W7 = AE

26 W1, W3, W4, W7 = B2

28 W1, W4, W7 = B6

30 W1, W3, W7 = BA

32 W1, W7 = BE

Note :

1. The mechanical jumpers have to be shorted as shown above.

2. The jumpers not mentioned to be left open.

RSU INSTALLATION MANUAL 43

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech BL-Series Bedienungsanleitung Seite 45

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech BL-Series