Multi-Tech Systems, Inc.
RF550VPN/RF560VPN Reference Guide – Setup Examples 2
How-To: RF550VPN/RF560VPN Application
Examples
Copyright © 2003
This publication may not be reproduced, in whole or in part, without prior expressed written permission
from Multi-Tech Systems, Inc. All rights reserved. Multi-Tech Systems, Inc. makes no representations or
warranty with respect to the contents hereof and specifically disclaims any implied warranties of
merchantability or fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves the
right to revise this publication and to make changes from time to time in the content hereof without
obligation of Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Product Number: S000258D
Revision Date Description
A 04/09/02 Initial release
B 04/17/02 Added example 3
B1 04/26/02 Minor changes to configuration tables.
Update Screen shots for Sentinel production version 1.3.
Added Manual choice for Secure Association under VPN Settings.
B2 05/06/02 Added notes stating that Secure Association set for Manual only works for static to
static connection.
B3 05/20/02 Clarified Sentinel procedure and removed Dynamic IP option.
B4 06/27/02 Updated screen shots for RF550VPN/RF560VPN firmware V4.62. Corrections to
example 2 using Dynamic IP.
B5 07/18/02 Added Dynamic IP back into example 4.
C 04/18/03 Changes to suppport software version 4.64
D 07/07/03 Add RF560VPN.
Contents
1. A LAN-to-LAN VPN configuration between Two RF550VPN/RF560VPNs. One at Site A and one
at Site B. Both RouteFinders using static IP addresses at their WAN port gateways.
2. A LAN-to-LAN VPN configuration between an RF550VPN/RF560VPN at Site A using a static IP
address and an RF550VPN/RF560VPN at Site B using dynamic IP addressing through their
respective WAN ports.
3. A LAN-to-LAN VPN configuration between an RF550VPN/RF560VPN at Site A using a static IP
address at the WAN port and an RF550VPN/RF560VPN at Site B using dynamic IP addressing
through a modem connected to the serial port.
4. A Client-to-LAN configuration between an RF550VPN/RF560VPN at Site A with a SSH Sentinel
Client.
The RouteFinder software is pre-installed on the RF550VPN/RF560VPN RouteFinder. Initial
configuration is required in order for you to run the RouteFinder
software and begin operation. The
browser-based interface eases VPN configuration and management. The VPN functionality is based on
IPSec and PPTP protocols and uses 168-bit Triple DES encryption to ensure that your information
remains private.
Caution: Use a safe Password! Your first name spelled backwards is not a sufficiently safe password; a
password such as
xfT35$4 is better.
(38 Seiten)
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern