Multitech RF560VPN Bedienungsanleitung PDF herunterladen (Seite 44)

Multi-Tech Systems, Inc.

RF550VPN/RF560VPN Reference Guide – Setup Examples 44

5. The VPN Settings screen for entering specific VPN settings will display. The Connection Name

(SiteBtoA) defaults into the first field. Continue to enter the following settings:

a) Select Disable UID and leave Local IPSec Identifier and Remote IPSec Identifier blank.

b) Do not check Enabled Keep Alive.

c) Do not check Enabled NetBIOS Broadcast.

d) Remote Site – Select LAN.

e) Remote IP Network – Enter the Remote IP Network address (LAN) for Site A. (Ex:

192.168.2.0)

f) Remote IP Netmask – Enter the Remote IP Netmask address for Site A. (Ex: 255.255.255.0)

g) Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site A. (Ex:

204.26.122.103)

h) Network Interface – Select the Network Interface from the drop-down list box. (Ex: AUTO)

Selecting AUTO will use the WAN connection first, and if this fails to make an Internet

connection, will try the serial modem interface next.

i) Secure Association – Select how inbound packets will be filtered. IKE is the default. IKE

primarily encompasses router key exchange and the negotiation of security policy. Selecting IKE

displays the following fields.

j) Perfect Forward Secure – Check the Enabled button.

k) PreShared Key – Enter the PreShared Key name (you can enter an alpha numeric name but it

needs to match the security code for the RouteFinder at Site A. (Ex: 1o2t3t4f)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 58 59

Keine Kommentare

Multitech RF560VPN Bedienungsanleitung Seite 44