Multitech MTS2BTA-R Spezifikationen PDF herunterladen (Seite 7)

Serial-to-Bluetooth Adapter

7

Optional – Directions for Direct DC Power

Connection for Use with the MTS2BTA

• Connect a fused DC power

cable into the power

connector on the

MultiModem.

• Then attach the two wires

at the other end of the

fused cable to a DC

fuse/terminal block on a

vehicle in which you are

mounting the MultiModem.

Connect the red wire to the

"+" positive and the black

wire to the "–" negative. Be

sure the GND connection is

correct.

Note: For automotive

application: according to the

type of application, you can

use permanent “+” or key-

switched “+”. Connect the

power supply to its source (for

example, in a mobile situation,

to the vehicle’s DC

fuse/terminal block).

Warning: Over-voltage

protection is provided on the

device. To ensure complete

protection, you may want to

add additional filtering to the

DC input.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare