Multitech RF825-C-NX-AP Bedienungsanleitung PDF herunterladen (Seite 10)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 10

Example 2 – A Setup Using Two RouteFinders

Behind a Non-NAT Device

Side A Side B

Note: Prerequisite Steps must be completed before you start this setup.

The Following Directions Apply to Side A of Example 2

Step 1 for Side A – Network Setup

1. Log in to your RouteFinder and go to the Networks & Services screen.

2. Enter a Name for the remote WAN IP address. Example: Remote-WAN

3. Enter the remote WAN IP Address (Ex. 65.126.90.250) with a single Subnet Mask of

255.255.255.255

4. Click Add to add the network to the list

5. Enter a Name for the remote LAN IP Address. Example: Remote-LAN

6. Enter the remote LAN IP Address (Ex. 192.168.2.0) with a network Subnet Mask for the

255.255.255.0.

Remote-WAN 65.126.90.248 255.255.255.255 Edit | Delete

Remote-LAN 192.168.25.0 255.255.255.0 Edit | Delete

Once the network configuration is complete, the information about that network displays at the bottom

of the screen.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Keine Kommentare

Multitech RF825-C-NX-AP Bedienungsanleitung Seite 10