
MultiModem rCell Intelligent Wireless Router
Multi-Tech Systems, Inc. Quick Start Guide 9
Setup Wizard Screen
IP Configuration
IP Address – The default is 192.168.2.1. To change it, simply enter
your own IP address.
Mask – The default is 255.255.255.0
DNS – Enter the primary DNS IP address for the system. The default
is 0.0.0.0
PPP Configuration
PPP – The default is Disable. To connect to the internet, you have
to enable PPP.To issue commands to the modem, PPP must be
disabled and telnet port 5000 used.
Dial-on-Demand – The default is Disabled.
Idle Time Out – Sets the amount of time the PPP link stays active
before disconnecting. Setting the value to zero causes the link to
stay active continuously.
Dial Number – Enter the dial number.
For GSM, the number is *99***1#.
For CDMA, the dial number is #777.
APN – Enter the APN (Access Point Name) for GSM. The APN is
assigned by your wireless service provider.
APN does not apply for CDMA models.
Kommentare zu diesen Handbüchern