Multitech CDMA Betriebsanweisung PDF herunterladen (Seite 41)

Chapter 9 – +I Prefix Commands

CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 41

Chapter 9 – +I Prefix

Commands

+ICF= Character Framing

Syntax: AT+ICF=<[f],[p]>

AT+ICF? (Queries the settings)

Description: Settings with this command are ignored. Normally, this command sets the local serial port

(DTE - DCE) connection character framing.

The modem uses a true serial interface, but the modem’s support is limited to:

8-bit data

1 stop bit

no parity (the parity setting is ignored)

Note: These are the default values.

Parm Value Meaning

f (format) 3 8 data bits, 1 stop bit (no other values are permitted)

p (parity) 0–3 value is ignored

See also +IPR (Fixed Port Rate).

+ILRR Local Rate Reporting

Syntax: AT+ILRR[=0]

AT+ILLR? (Queries the settings)

Description: Enables and disables the reporting of the local rate to the host (DTE).

Note: The modems do not support local rate reporting. This command is provided for

compatibility only and only accepts a setting of 0 (off).

+IPR – Set Serial Speed

Description: Sets the serial speed.

Syntax: AT+IPR=<serial speed value>

Values: 300 to 921600

Display: AT+IPR? Displays the current serial speed.

AT+IPR=? Displays a list of all possible values (serial speeds).

Default: 115200

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 66 67

Keine Kommentare

Multitech CDMA Betriebsanweisung Seite 41