Multitech MTCBA-G-F2 Bedienungsanleitung PDF herunterladen (Seite 9)

Chapter 2 – Dialing Services

Multi-Tech Systems, Inc. AT Commands for Wireless Modems with IP Connectivity (S000333D) 9

#DIALN2 Set Secondary Dial-Up Number

Definition: This parameter is the secondary dial-up phone number that will connect with the local ISP. Length

depends on country.

Values: Decimal phone numbers. No default.

Syntax: Set Value: AT#DIALN2=<value>

Get Value: AT#DIALN2? or AT#VPHY, AT#VALL

#DIALSELECT Set Internet Connection Number

Definition: The value of this command determines the number called to establish an Internet connection. It

configures the TCP/IP stack software to use the primary dial-up number or the secondary dial-up

number.

Values: 1 Use primary dial-up number. Default 1.

2 Use secondary dial-up number

Syntax: Set Value: AT#DIALSELECT=<value>

Get Value: AT#DIALSELECT? or AT#VPHY, AT#VALL

#ISPPW Set ISP Password

Definition: This parameter sets the password for the ISP account. When communication is initiated and once the

physical (modem) connection has been established with the ISP, the TCP/IP stack software must

provide the ISP with the password associated with the account to be used.

Values: Alpha-numeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#ISPPW=<value>

Get Value: AT#ISPPW? or AT#VPPP, AT#VALL

#ISPUN Set ISP User Name

Definition: This parameter sets the user name of the ISP account. When communication is initiated and the

physical (modem) connection has been established with the ISP, the TCP/IP stack software must

provide the ISP with the user name associated with the account to be used.

Values: Alpha-numeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#ISPUN=<value>

Get Value: AT#ISPUN? or AT#VPPP, AT#VALL

#PPPMODE Set TCP/IP Behavior

Definition: The TCP/IP stack can manage the access layer in different ways. This parameter selects the way the

TCP/IP stack must run once the physical is layer successfully established.

Values: Integer between 0 and 4 inclusive.

1 Standard PPP. The TCP/IP stack behaves as a PPP client for outgoing calls and as a PPP server

for incoming calls. Default 1.

2 Reverse PPP. The TCP/IP stack behaves as a PPP server for outgoing calls and as a PPP client

for incoming calls.

3 PPP client only. The TCP/IP stack always behaves as a PPP client for both outgoing and

incoming calls.

4 PPP server only. The TCP/IP stack always behaves as a PPP server for both outgoing and

incoming calls.

9 Specific. This case is reserved for specific behavior.

Syntax: Set Value: AT#PPPMODE=<value>

Get Value: AT#PPPMODE? or AT#VPPP, AT#VALL

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 77 78

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MTCBA-G-F2 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech MTCBA-G-F2