Multitech MT2834ZPX Betriebsanweisung PDF herunterladen (Seite 7)

Command Function/Options

$EBn Eleven Bit Mode.

* $EB0 Disable 11 bit mode.

$EB1 Enable 11 bit mode.

&En Error Correction / Flow Control.

&E0 No Error Correction.

* &E1 V.42 Auto-reliable mode.

&E2 V.42 Reliable mode.

&E3 No modem-initiated flow control.

* &E4 CTS/RTS modem-initiated flow control.

&E5 XON/XOFF modem initiated flow control.

* &E6 Disable XON/XOFF pass-through.

&E7 Enable XON/XOFF pass-through.

&E8 Disable Enq/Ack pacing.

&E9 Enable Enq/Ack pacing.

* &E10 Disable Normal Mode flow control.

&E11 Enable Normal Mode flow control.

&E12 Disable pacing.

* &E13 Enable pacing.

&E14 Disable Data Compression.

* &E15 Enable Data Compression.

%En Escape Method.

%E0 Disable escape sequence (modem won't escape).

* %E1 Enable +++ AT Method

%E2 Enable BREAK AT Method.

%E3 Enable both +++AT and BREAK AT Methods.

%E4 Disable "OK" response to +++AT.

%E5 Enable "OK" response to +++AT.

#Fn Fallback Settings.

#F0 Disable on-line fallback.

#F1 Enable on-line fallback; Fallback from 33.6K to 4800 bps when on-line

(increments of 2400 bps).

* #F2 Enable on-line fallback and fall forward. Fallback from 33.6K to

4800 bps. Fall forward if line improves (increments of 2400 bps).

&Fn Load Factory Defaults.

&F0 Load factory defaults from ROM.

* &F8 Reads factory defaults when &F is issued.

&F9 Read parameters stored in nonvolatile memory when &F is issued.

$Fn Link Fallback.

$F0 Disable fallback to normal connect if CR received.

* $F1 Enable fallback to normal connect if CR received.

3-3

SRM-100 - AT Command Reference Guide; Multi-Tech Format AT Command Set

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT2834ZPX Betriebsanweisung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Multitech MT2834ZPX