Multitech MT5634HD16 Betriebsanweisung PDF herunterladen (Seite 57)

E AT Command Summary

CommPlete Communications Server 51

Command Values Description

Hn n = 0 or 1 Hook Control

*** H0 Go on-hook (hang up).

H1 Go off-hook.

In n = 0, 1, 2, 3, Information Request

4, or 9 I0 Display default speed and controller firmware

version.

I1 Calculate and display ROM checksum (for

example, “12AB”).

I2 Check ROM and verify the checksum,

displaying OK or ERROR.

I3 Display default speed and controller firmware

version.

I4 Display firmware version for data pump (for

example, “94”).

I9 Display country code (for example, “NA Ver. 1”).

&Jn n = 0 Auxiliary Relay Control

*** &J0 The auxiliary relay is never closed.

\Jn n = 0 Data Buffer Control

*** \J0 Enable data buffer — serial port speed is

independent of connect speed

&Kn n = 0, 3, or 4 Local Flow Control Selection

&K0 Flow control disabled.

*** &K3 Enable CTS/RTS hardware flow control.

&K4 Enable XON/XOFF software flow control.

\Kn n = 5 Set Break Control

*** \K5 Modem sends break signal received from the

DTE to the remote modem.

In dialing

command

Redial Last Number

Must be placed immediately after ATD.

Ln n = 0, 1, 2, Monitor Speaker Volume

or 3 L0 Select low volume.

L1 Select low volume.

*** L2 Select medium volume.

L3 Select high volume.

Mn n = 0, 1, 2, Modem Speaker Control

or 3 M0 Modem speaker always off.

*** M1 Modem speaker on until carrier signal detected.

M2 Modem speaker always on.

M3 Monitor speaker on during dialing, off during

handshaking.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare

Multitech MT5634HD16 Betriebsanweisung Seite 57

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Multitech MT5634HD16