Multitech BL-Series Betriebsanweisung PDF herunterladen (Seite 25)

Chapter 3 - Using the Front Panel

Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)

dvdv

ancanc

anc

ed Opted Opt

ed Opt

nsns

RS232 OPTIONS. The following screens are used to configure the RS-232 interface.

DTR OPTIONS. Use the

ÆÆ

Æ and Enter buttons to select how the

modem responds to the high to low transition of the DTR signal

sent by the computer. DTR NORMAL causes the modem to

hang up; IGNORE DTR allows operation with computers that do

not provide DTR; and RESET ON DTR

ÈÈ

È causes the modem to

perform a soft reset as if the

command were received. Same as

the &

, &

, and &

commands.

CARRIER DETECT OPTIONS. Use the

ÆÆ

Æ and Enter buttons

to select whether CD will be forced high (CD FORCED ON) or

whether it will go high when the remote modem’s carrier signal is

detected, and go low when the carrier signal is not detected (CD

NORMAL). Same as the &

and &

commands. When using

callback security on UNIX systems, select CD LOW IN CB to

force CD low until the proper callback security password has

been entered or until a disconnect occurs. This prevents the

UNIX login prompt from being displayed before the callback se-

curity ENTER PASSWORD prompt appears. Select CD NOR-

MAL IN CB to disable this feature. Same as the &

and &

commands.

CTS OPTIONS. Use the

ÆÆ

Æ and Enter buttons to select whether

the CTS state will follow the RTS state when on line (CTS

NORM) or whether CTS will always be high (CTS ON). Same as

the &

and &

commands.

DIALBACKUP/LL OPTIONS. The following screens are used to configure dial back-

up for four-wire leased line operation. For more information, see Chapter 4, “Leased

Line Operation.”

DIAL BACKUP NUMBER. Use to enter a dial backup number.

To scroll through a list of digits and characters, press the

ÇÇ

ÅÅ

and

ÈÈ

È buttons. To go to the next position, press the

ÆÆ

Æ button.

To back up or to exit without saving, press the

ÆÆ

Æ button several

times. To save the number, press the Enter button. Note: Only

16 characters can be displayed at a time. To see characters 17–30,

press the

ÈÈ

È button. To go to the previous screen, press the

ÅÅ

button. To go to the next screen, press the

ÆÆ

Æ button.

TIME TO RESTORE (S15). Sets how frequently leased line

restoral attempts occur when the modems are in dial backup

mode. The restore time interval can be set from 10 to 255 min-

utes in one minute increments. A value of 0 disables dial back-

up. Same as the

S15=

command.

DIALBACKUP TIME (S17). Use to set how long the modem

waits after a leased line failure before it attempts a dial backup

connection. The timer can be set from 1 to 255 minutes in one

minute increments. Same as the

S17=

command.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 61 62

Kommentare zu diesen Handbüchern

Keine Kommentare

Campbell CVF4 Instrukcja Obsługi (42 strony)

Marka: Campbell | Kategoria: No info | Rozmiar: 1.39 MB |

Spis treści

INSTRUCTION MANUAL

WARRANTY AND ASSISTANCE

Table of Contents

Figures

CMP21-L Pyranometers

4. Quickstart

4.2 Mounting

5. Overview

6. Specifications

6.2 CVF3 Ventilation Unit

6.3 CVF4 Ventilation Unit

7. Installation

7.2 Wiring

7.2.2 CMP6 and CMP11 Wiring

7.2.3 CMP21 Wiring

7.3 Programming

7.3.3 Example Programs

8. Maintenance

8.2 Changing the Desiccant

8.3 Check Sensor Output

9. Troubleshooting

Ventilator

A.3 Installation

A.3.1 CVF3

Ø 7 mm (2x)

A.4 Wiring

A.5 Maintenance

A.5.2 CVF4

Campbell CVF4 Instrukcja Obsługi (27 strony)

Marka: Campbell | Kategoria: No info | Rozmiar: 0.98 MB |

Spis treści

Instruction Manual

WARRANTY AND ASSISTANCE

Important User Information

Declaration of Conformity

Table of Contents

1. Introduction

1.1 CVF4 top side

1.2 CVF4 bottom side

2. Installation

Ø 7 mm (2x)

Instruction Manual - CVF4

VENTILATION UNIT CONNECTION

3. Accessories

3.3 CMF4 Mounting Fixture

3.4 CMB 1 Mounting Bracket

4. Maintenance

5. Speciﬁcation

6. Trouble shooting

7. Customer support

HEAD OFFICE

SALES OFFICES

Więcej produktów i instrukcji dla Nie Campbell

Modele	Rodzaj dokumentu
SC-USB	Podręcznik Użytkownika Campbell SC-USB User guide, 26 strony
SC-USB	Instrukcja Obsługi Campbell SC-USB Product manual, 36 strony
KH20	Instrukcja Obsługi Campbell KH20 Instruction manual [en] , 48 strony
SDM-CD16D	Podręcznik Użytkownika Campbell SDM-CD16D User guide, 17 strony
CS505	Instrukcja Użytkownika Model CS205 10-Hour Fuel Temperature Stick [en] , 10 strony
25458	Instrukcja Użytkownika 25458 DIN-Rail Terminal Kit [en] [it] , 10 strony
CS210	Instrukcja Użytkownika CS210 Manual - Campbell Scientific, 14 strony
TX312	Instrukcja Użytkownika Snotel Goes Manual R2b, 10 strony
SDM-CD16D	Dokumentacja Campbell SDM-CD16D Specifications, 20 strony
TDR	Instrukcja Użytkownika Comparison of laboratory TDR soil water measurements, 16 strony
CompactFlash CFM100	Instrukcja Obsługi Campbell CompactFlash CFM100 Instruction manual, 32 strony
SC932C 9-Pin	Podręcznik Użytkownika Campbell SC932C 9-Pin User guide, 16 strony
CompactFlash CFM100	Instrukcja Obsługi Campbell CompactFlash CFM100 Product manual [en] , 28 strony
CS525	Instrukcja Użytkownika CS525 - Campbell Scientific, 2 strony
TX320	Instrukcja Użytkownika La Désirade et Deshaies : choix technologiques et - Refmar, 14 strony
RTMS SYSTEMS	Instrukcja Obsługi Campbell RTMS SYSTEMS Instruction manual, 58 strony
RWIS STATIONS	Instrukcja Użytkownika Flood, Road, and Weather Data in Colorado, 2 strony

Multitech BL-Series Betriebsanweisung Seite 25

Kommentare zu diesen Handbüchern

Campbell CVF4 podręczniki

Campbell CVF4 Instrukcja Obsługi (42 strony)

Spis treści

Campbell CVF4 Instrukcja Obsługi (27 strony)

Spis treści

Więcej produktów i instrukcji dla Nie Campbell

Multitech BL-Series Betriebsanweisung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Multitech BL-Series

Campbell CVF4 podręczniki

Campbell CVF4 Instrukcja Obsługi (42 strony)

Spis treści

Campbell CVF4 Instrukcja Obsługi (27 strony)

Spis treści

Więcej produktów i instrukcji dla Nie Campbell