Multitech MT9234ZPX-UPCI Betriebsanweisung PDF herunterladen (Seite 8)

Chapter 2 - Installation

8 Multi-Tech Systems, Inc. MT9234ZPX User Guide

Chapter 2: Installation

General Safety

• Use this product only with UL- and CUL-listed computers (U.S.A.)

• To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger telephone wiring.

• Never install telephone wiring during a lightning storm.

• Never install a telephone jack in a wet location unless the jack is specifically designed for wet

locations.

• Never touch uninsulated telephone wires or terminals unless the telephone line has been

disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Avoid using a telephone during an electrical storm; there is a risk of electrical shock from lightning.

• Do not use a telephone in the vicinity of a gas leak.

• The telephone cord is to be disconnected before accessing the inside of the equipment.

Install your MultiModem

Installing the MultiModem requires you to open your system. Please consult your system manual in addition

to the following instructions.

MT9234ZPX-UPCI

MT9234ZPX-PCIE

1. Turn off your system and unplug it. Failure to do so may result in damage to both the MultiModem

and your system. Do not turn on the system until the instructions tell you to do so.

2. Remove the cover from your system as instructed in the system manual.

3. If you are installing a MT9234ZPX-PCIE board in a low profile machine, you will need to change the

mounting bracket to the low profile mounting bracket.

4. Select an empty PCI expansion slot. Remove the expansion slot cover and save the retaining screw.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 38 39

Keine Kommentare

Multitech MT9234ZPX-UPCI Betriebsanweisung Seite 8