Multitech MT2834ZDX Spezifikationen PDF herunterladen (Seite 87)

A Regulatory Compliance

Compliance with BABT Requirements

Approved for connection to telecommunications system specified in the in-

structions for use subject to the conditions set out in them.

Warning: Interconnection directly, or by way of other apparatus, of ports

marked “SAFETY WARNING see instructions for use” with ports marked or not

so marked may produce hazardous conditions on the network. Advice should

be obtained from a competent engineer before such a connection is made.

Telephones that connect to the external socket must be approved for direct

connection to the Public Switched Telephone Network (PSTN).

This apparatus has been approved for the use of the following facilities:

• Auto-calling

• Loop disconnect and MF dialing

• Phone number storage and retrieval by a predetermined code

• Operation in the absence of proceed indication

• Automatic storage of last number dialed

• Tone detection-busy

• Auto clear from the originating end

• DTR dialing

• Modem

• PBX timed break register recall

Any other usage will invalidate the approval of the apparatus if, as a result, it

then ceases to comply with the standards against which approval was granted.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 103 104

Keine Kommentare

Multitech MT2834ZDX Spezifikationen Seite 87